Cisco M-Learning mobile study brings the best of official Cisco training to the palm of your hand, on the go, and at an economical price. These supplemental mobile learning modules are designed to help certification candidates reinforce key networking fundamentals, and they can increase understanding of Cisco technologies for anyone who is interested in Cisco product training.
How to get Cisco M-Learning Viewr (FREE)
Step 1. Grab a free video viewer.
Step 2. Shop mobile learning modules to purchase from the Cisco Learning Network store.
Step 3. Load modules onto your device to begin study.
The Cisco Enterprise Branch Architecture takes into account services such as voice, data, video, and security that customers want to deploy at their endpoints, regardless of the distance between the endpoints or how they are connected. This learning module presents the Cisco Enterprise Branch Architecture and explains how it guides the development of a complete branch network solution.
This learning module describes one of the advanced access controls of the Cisco Adaptive Security Appliance (ASA), the Botnet Traffic Filter. The module also provides demonstrations of how to configure and verify the Botnet Traffic Filter.
This learning module describes the basics of HTTP inspection on the Cisco Adaptive Security Appliance (ASA). It also provides demonstrations of how to configure, verify, and troubleshoot HTTP inspection.
Cisco has integrated an Intrusion Prevention System (IPS) into Cisco IOS Software based routers. Cisco IOS IPS is now inline, deep packet, inspection technology?which helps to effectively mitigate a wide range of network attacks without compromising performance and is available at every network access point.
Spanning Tree Protocol (STP) is a very mature protocol, benefiting from years of development and production deployment. However, as STP makes assumptions about the quality of the network, the protocol can fail. Those failures are generally high-profile failures because of the extent to which they impact the network. STP is designed to never open a loop, even temporarily, during its operation. However, like any protocol, it is based on some assumptions that might not be valid in a network.
A switch with multiple VLANs requires a means of passing Layer 3 traffic between those VLANs. Multilayer switches provide the ability to route between VLANs as well as create individual routed ports. In this learning module, you will learn how to create a Switched Virtual Interface (SVI) to route between VLANs. You will also configure a routed port and enable routing on a multilayer switch.
The Catalyst switch Cisco IOS Software has different configuration modes, including the global configuration mode and the interface configuration mode. This mobile learning module describes how to complete the initial switch configuration using both modes.
This mobile learning module discusses VLANs, trunking, and the VLAN Trunking Protocol (VTP) in Cisco multilayer switched networks. The basic configuration and troubleshooting of VLANs, trunking, and inter-VLAN routing are also covered.
This mobile learning module teaches basic Open Shortest Path First (OSPF) protocol concepts. This module demonstrates how to configure authentication for OSPF, how to configure load balancing with OSPF, and how to verify OSPF configuration and perform basic OSPF troubleshooting.
This mobile learning module teaches the difference between LANs and WANs and covers methods for connecting to a WAN. The module also includes a video demonstration of configuring and verifying a basic WAN serial connection and troubleshooting basic WAN implementation issues.
This mobile learning module teaches basic Enhanced Interior Gateway Routing Protocol (EIGRP) concepts. You will also watch a demonstration of how to perform the required configuration, configure load balancing and route authentication, and verify and troubleshoot your EIGRP configuration.
Spanning Tree Protocol (STP) helps prevent a LAN with redundant links from causing Ethernet frames to loop for an indefinite period of time. This mobile learning module provides an overview of STP and its configuration.
802.1X is an IEEE standard for media-level access control, offering the capability to permit or deny network connectivity, control VLAN access, and apply traffic policy based on user or machine identity. This learning module describes the basics for deploying 802.1 features for increase control over unauthorized network access.
Digit manipulation, or the ability of Cisco Unified Communications Manager to add or subtract digits to comply with a specific internal dial plan or national numbering plan, is important to providing transparent dialing and to creating a unified dialing plan for end users.
Enhanced Interior Gateway Routing Protocol (EIGRP) is a scalable routing protocol, which ensures that as a network grows larger, it operates efficiently and adjusts rapidly to changes. This lesson describes advanced EIGRP features for stub networks and practical EIGRP-specific design and configuration techniques to implement an effective, scalable network.
In this learning module, you will learn how the Cisco Security Agent and the Cisco Intrusion Prevention System (IPS) defend against network threats and how they can work together to enhance their operation.
This learning module provides engineering and architectural principles that are critical for the successful implementation of an enterprise campus network. You will also learn the role of the three tiers, or functional layers, of an enterprise campus.
The data center brings its own specific challenges to network design, based on the density of high-performance end nodes within a very constrained physical space. This learning module describes general considerations for effectively integrating data center design.
The Cisco M-Learning Test and Study app is the ideal on-the-go study application for those preparing for Cisco Certification. Currently providing support for the ICND1, ICND2, and Cisco CCNA exams, the Cisco M-Learning Test and Study app includes the ability to purchase both Cisco M-Learning mobile video modules, and practice questions taken from the online Cisco Certification practice exams. Learners can now combine practice questions and mobile video modules for a truly comprehensive mobile study tool for the ICND1, ICND2, and CCNA exams.
This is the second app in the Cisco M-Learning product line for mobile devices such as iPhones, iPads, and Android smart phones. The Cisco M-Learning Test and Study app allows learners to purchase certification exam practice questions and video tutorials to supplement their certification studies. Practice sets include multiple choice/single answer questions, multiple choice/multiple answer, drag-and-drop, and even a reworked version of Cisco exam simulations that display well on the iPhone screen.
The app is initially being released with one free set of Cisco CCNA® practice questions and one free video. Available for in-app purchase are 5 more sets of practice questions and 26 videos targeting CCNA, ICND 1, and ICND 2. With this app, learners are able to step through a practice test question by question and get item-level feedback, study by question domain, or simulate a real exam and see how they fare. Exam results are saved so that learners can track trending of their exam scores in a convenient historical graph.